What's included in your "regular use" service

All bolts tightened to correct torque settings. All parts inspected for damage and wear. 

A gear hanger needs to be perfectly straight to enable your gears to work smoothly and properly. We will adjust it if required, and if it's appropriate* for us to do so. 

Once your gear hanger is straight, we can set to work on making sure that your chain shifts seamlessly between your gears. We will replace your gear cables*, adjust them and set them up perfectly.

Your brake cables are replaced*, adjusted and aligned to ensure you have maximum stopping capacity. We will also remove and clean your brake pads and discs (if you have them) before putting them back onto your bike. 

We remove your chain, chainrings, sprocket and both derailleurs, before thoroughly degreasing them. We put them back and re-lubricate them with the correct product for the current riding conditions.  

Wheels are checked for any small buckles or hops before being trued back straight again. 

We will ensure there is no unwanted movement in your headset. Making sure your handlebars turn smoothly and easily. 

We don't want you to be pedalling any harder than you should be, so we will adjust any unwanted movement out of your bottom bracket to make your cranks turn smoothly.  

We make sure your tyres are free of debris, and will pump them up to the recommended pressure.

Don't be alarmed by seeing our Engineer riding your bike down the road. They are just checking that everything is working as perfectly as it should do.

Your bike will be returned to you looking and feeling great. Ready for your next ride.